Services

Omega EMS' New Product Introduction

Process Excellence with Flexibility for Any Project Size

At Omega, we believe New Product Introduction (NPI) should go beyond the typical approach of quick-turn prototype manufacturing. Our comprehensive NPI support bridges all activities related to creating a new product – by defining and managing the “right EMS solution” via trusted supplier partners and experienced management teams.

Our team will oversee and manage all parties to ensure all activities are inline with the project critical path. Using a Sr. level PM as the single point of contact you get in parallel project management coordination for on schedule performance:

  • Internal layout
  • Material procurement
  • PCB fabrication
  • Manufacturing preparation 

Experienced from Concept to Production

There are many common NPI problems that can not only cause a major impact to your product development schedule but also cost you additional time and money. Some of these items may include:

  • Lack of a realistic and clearly defined schedule
  • Lack of schedule tracking and communication: accountability for all parties
  • Unrealistic production ramp: usually results in the selection of the wrong manufacturing partner
    • Small EMS players have process excellence but lack sophistication in Materials Management / Procedure & Policy
    • Large EMS solutions lack flexibility and interest in smaller revenue streams creating procedural “red tape”
  • Proper negotiations and pricing registration: timing is crucial
  • Failure to determine test strategy / philosophy prior to layout completion
  • Basic document control enforcement: part number, revision and data control
  • Not pipelining material appropriately at the right time
  • Not understanding the impact of ECO and design changes for product in WIP
  • Building too few / too many prototypes
  • Trying to transition to low cost regions prior to design stabilization

Omega EMS leverages it’s extensive project management experience to identify the critical path to your projects success and proactively prepare and plan for any potential roadblocks to ensure your schedule is met.

PCBA Layout & Design

Omega’s expert designers are unparalleled in their ability to craft intricate designs that meet even the strictest requirements; featuring high-end materials, extremely fine pitches of less than 0.4 mm and multi-dimensional elements like ELICs & blind/buried vias – all on boards ranging from rigid flex to micro footprints! Furthermore, Omega ensures a seamless translation between design theory and fabrication process thanks to ongoing dialogue with manufacturing for maximum cost savings & yield optimization.

  • Stack up modeling
  • Footprint library development
  • BOM verification
  • Mechanical outline control
  • 3D model development of electronic components
  • 3D assembly and interference analysis
  • Multilayer PCB layout (up to 34 layers)
  • Gerber/Deliverable package for fabrication/assembly
  • Compliance testing support and management
  • Design for manufacturing (DFM)

Mechanical Design

At Omega EMS, we are committed to providing the highest quality mechanical design solutions. Our team of experienced engineers and MCAD designers have extensive experience in new product development across multiple industries such as high tech, medical devices, aerospace, military equipment and electrification products. We make use of state-of-the art 3D CAD systems combined with our analysis tools & testing equipment to bring you an innovative turnkey solution for all your mechanical needs from creating a complete project or making modifications/improvements on existing designs!

  • Industrial design
  • Mechanical requirements
  • Mechanical architecture
  • 3D and 2D CAD layout and part design
  • Parts and assembly documents
  • Prototyping
  • Testing and design verification
  • Tooling
  • Compliance testing support and management
  • Design for manufacturing (DFM)

Manufacturing Engineering

Omega EMS provides cutting-edge manufacturing services to bring our customers’ most intricate designs to life. We specialize in advanced SMT, microelectronics, BGA placements and through-hole assembly processes for all kinds of PCBs. Our manufacturing expertise also extends into hybrid techniques like lead free/tin-lead soldering, wave & selective soldering, thin film circuit foundry as well as RF/microwave products assembling Mil Spec quality testing!

  • Industrial design
  • Mechanical requirements
  • Mechanical architecture
  • 3D and 2D CAD layout and part design
  • Parts and assembly documents
  • Prototyping
  • Testing and design verification
  • Tooling
  • Compliance testing support and management
  • Design for manufacturing (DFM)
  • Design for test (DFT)

Component Engineering

With Omega EMS, your component engineering worries are over! Our experienced team is dedicated to helping you find the best components for any project. We stay up-to-date on all changes in regulations and compliance so that you don’t have to – allowing you to focus on what matters most. Plus, our services ensure a worry free experience with peace of mind knowing that everything has been taken care of correctly.

  • RoHs review
  • EOL / obsolescence review
  • Component life cycle and years to end of life forecasts
  • Cross-references to alternate parts and suppliers
  • Regulatory analysis
  • Design for manufacturing

Cable and Harness Assembly

At Omega EMS, our expert team can provide the custom wiring setup you need to make your system complete. We’re well-versed in designing and building wire harnesses of all kinds – from small sets with a few wires up to larger ones using hundreds of components and terminations! Let us help create an efficient solution tailored just for you!

  • Prototype quick turn
  • Production assemblies
  • Cost saving system integration custom cables
  • Inventory of wire, terminals, and components
  • Stripping, crimping, labeling, and tie- wrapping
  • Verification & electrical continuity testing
  • Pull test

Project Management

Omega EMS’s project management team is committed to ensuring a successful outcome by implementing a single point of contact and coordinating between all pertinent parties. Working “in parallel” with internal layout, material procurement, PCB fabrication, and manufacturing preparation departments allows for the critical path to be adhered to – guaranteeing that everyone involved operates according to their timeline commitments.

  • Scope and goal development
  • Dependency analysis
  • Roles and responsibility
  • Project status reports & meetings
  • Project achievement

Material Management

At Omega EMS, we strive to provide the best possible materials management and logistics solutions for your electronic manufacturing needs. Our suite of powerful tools allow you to manage inventory, generate custom reports in a variety of formats and handle MRP functions with ease.

  • MRP Implementation
  • Custom Analytics & Reports
  • Bonding/VMI Programs
  • Customer Portal
  • Supplier identification, qualification and implementation
  • Supplier performance evaluation
  • Failure Analysis / Closed Loop Corrective Action

Systems Integration

Omega provides integration services that support today’s innovative and unique business models. We develop customer specific processes, tracking and testing of sub-systems and systems products. We work with standard and custom-designed enclosures and small and large form factors.

  • Design and engineering support
  • PCB assembly
  • Backplane assembly
  • Cable and harness assembly
  • Enclosures
  • Integration of hardware and software
  • Build to Order (BTO) and Configure to Order (CTO) services
  • Reliability testing
  • Functional testing

Testing & QA

At Omega EMS, we understand the importance of robust testing in ensuring a quality product. That’s why our design process emphasizes test coverage and maximizing points during this phase to keep everything on track. We have you covered with comprehensive reports detailing any uncaptured nets that need additional attention—furthermore, depending on your individual plan, our team will suggest the optimal in-house testing solution for you!

  • Coordinate measuring (CMM)
  • X-ray fluorescence (XRF)
  • Structural Verification (AXI)
  • Test Program Development
  • Boundary Scan Development & Test
  • Fixture Design & Manufacturing
  • In-circuit Test (ICT)
  • Flying Probe Test (FPT)
  • Functional Circuit Test (FCT)
  • ESS / Burn-in Test (BIT)
  • Vibration & Reliability Testing

Upgrade, Repair & Debug

Omega EMS provides comprehensive upgrade and repair services.

  • Onyx 29 bench top equipment
  • Top technicians, artists
  • Quick turn: 1 to 48 hour turns
  • Debug
  • Repair
  • Replace
  • Upgrade
  • In-House 3D X-ray Validation

Quality Management System

OmegaEMS is committed to providing QualityPrinted Circuit Board and System Integrated Products that are safe, effective, reliable, and offer the highest possible overall quality and value to our customers.

We are committed to provide quality awareness throughout our organization to assure compliance with all product, statutory and regulatory requirements, to maintain the effectiveness of our Quality Management System and with an emphasis on on-time Delivery, Product Quality, and Customer Satisfaction.

QMS implementation

4 structured levels

  • Tier I: Quality Manual
  • Tier II: Quality Procedures
  • Tier III: Work Instructions
  • Tier IV: Controlled Forms
  • ISO9001:2015
  • ISO13485:2016
  • AS9100D
  • ESD S20.20
  • ITAR

Logistics & Facilities

Omega EMS is located in the tech capital of the world, Silicon Valley, offering 80K square feet of operational space and room to expand. Our company takes pride in implementing state-of-the art MES software from AEGIS/Factorylogix while adhering strictly to J-STD/IPC standards for optimal quality. Moreover, our sophisticated facility provides you with ample capacity for finished goods storage as well as order fulfillment services.

  • Finished goods storage
  • Fulfillment services